The above is a brief introduction to the leak detection and sealing performance of anti-theft bottle caps of chemical plastic bucket mould.
Chemical plastic bucket mould In recent years, with the continuous development of various industries, more and more industries in chemical plastic bucket mould need to use it, but air bubbles often appear in the production process. If it is not resolved in time, it is equivalent to this Chemical plastic buckets are wasted and time is wasted, not to mention costs. Therefore, experts on this issue deliberately proposed a solution, let's take a look. Bubbles appear in chemical plastic bucket mould during production
It is hoped that it can help the quality control of the production and use units of chemical plastic barrel anti-theft bottle caps. The utility model relates to an anti-theft bottle cap, in particular to an improvement of an anti-theft bottle cap through an anti-theft ring. The anti-theft bottle cap includes a cover body and an anti-theft ring, and the cover body and the anti-theft ring are connected as a whole through a plurality of easily-breakable connection bridges.
Environmental pollution has aroused widespread attention from people from all walks of life. Plastic chemical barrel
Doubling is the carrying of chemicals; the whole barrel is very good-looking: cost-effective control of the appearance of loss of origin is suitable for our aesthetics; chemical plastic bucket mould can be used as storage products, convenient to clean up, its proper processing, high quality, using the factory Carrying, transporting, placing, and smooth manufacturing in production are key. Chemical plastic bucket mould are used for product packaging in many applications. Depending on the product intention of the merchant, chemical plastic bucket mould of different sizes can be manufactured.
Recycled plastic chemical bucket mould are tried and used by many companies. Because recycled plastic chemical bucket mould can not only reduce environmental pollution, but also save raw materials. It is made of waste plastic and is relatively simple to process, so it is widely used. Because the plastic bucket itself is damaged and difficult to repair, if it cannot be recycled,
Can inquire about the material and process of plastic buckets. Plastic chemical barrel
2. Increase the temperature of the plastic to make it flow smoothly. Decreasing the temperature of plastic can reduce its shrinkage rate, properly increase the temperature of the injection mold, especially increase the local mold temperature of the parts where vacuum bubbles are likely to form, and reduce the probability of bubbles. 3. To increase the energy of plastic injection, the injection pressure, speed, time and amount of material must be increased. At the same time, the back pressure must be increased to make the plastic filling fuller. 4. When the plastic enters the warm environment,
It is also necessary to check the tightness of the plastic bucket and the lid; there is also water vapor permeability, because most of the plastic buckets we buy are used to hold items, and many of them are required to be sealed and dry. Plastic barrel raw materials can be divided into: pure raw materials, sub-licensed materials, recycled materials, recycled materials. Pure raw materials: plastic bucket mould with regular grades purchased from regular petrochemical companies and futures markets.